New Products

Request Information
  • 23 models with displacement from 199 to 912 m³/h [50 Hz] and nominal power from 50 to 240 HP.
  • Vi = 2.3 optimized for low compression ratio [typically, applications with water condensation]
  • Two sizes of electric motors [motor 1 and motor 2] to increase the operating range
  • Capacity control through a dual type slide valve [step or continuous]
  • High performance efficiency in project [COP/EER] and also seasonal [ESEER/IPLV] conditions.
  • Highly efficient three-stage oil separation system
  • Can operate with economizer
Unit of Measure

Specifications

Displacement at 50 Hz

 N/A 199 to 912 m³/h

Displacement at 60 Hz

 N/A 8,434.42 ft³/h

Compressor Version

 N/A 2

Motor Power

 N/A 50 hp

Part Winding Start (PWS) Motor Partition

 N/A 50-50

Capacity Control (CC) Step

 N/A 100-75-50-25 %

Capacity Control (CC) Stepless

 N/A 100-50 %

Minimum Frequency

 N/A 30 Hz

Maximum Frequency

 N/A 70 Hz

Protection Device

 N/A INT69 FRYL Diagnose

Enclosure Class

 N/A IP65

High Pressure (HP)

 N/A 435.0 psi

Low Pressure (LP)

 N/A 297.3 psi

Oil Type

 N/A POE 170 cST

Oil Charge

 N/A 371.95 fl oz

Oil Filter

 N/A Standard; Replaceable

Oil Water Cooling

 N/A Standard

Integrated Check Valve

 N/A Standard

Net Weight

 N/A 1,164.44 lb

Series

 N/A CXW02

Applications

 N/A
  • Low compression ratio systems
  • Air condensation system

Additional Information

N/A All models are characterized by:

  • Excellent operating comfort
  • Advanced integrated protection and diagnostics systems
  • Eligibility for operation with HFC, HCFC and the new, low-GWP refrigerants
  • Ease of use and maintenance
  • Operation with frequency converter
  • Wide range of accessories